TB22
Vil slå et slag for DSC. Veldig kjekt når en først kommer over skrekken med anrop og å lese brukermanualen.
Er noen funksjoner som tilsynelatene få bruker/vet om:
Her noen klipp&lim fra min icom
-Transmitting an individual call The Individual call function allows you to transmit a DSC signal to only a specific station.
-Transmitting an Individual Acknowledgement When receiving an Individual call, you can transmit an acknowledgement (‘Able to Comply,’ ‘Propose New Channel’ or ‘Unable to Comply’)
-Transmitting a Group call The Group call function allows you to transmit a DSC signal to only a specific group
-Transmitting an All Ships call All ships, that have DSC transceiver, use Channel 70 as their ‘listening channel.’ When you want to announce a message to these ships within range, use the ‘All Ships Call’ function.
-Transmitting a Position Request Call Transmit a Position Request Call when you want to know a specific ship’s current position, etc
-Transmitting a Position Report Call Transmit a Position Report Call when you want to announce your own position to a specific ship
-Transmitting a Polling Request Call Transmit a Polling Request Call when you want to know a specific vessel is in the communication area, or not
-Transmitting a Test call Testing on the exclusive DSC distress and safety calling channels should be avoided as much as possible. When testing on a distress/safety channel is unavoidable, you should indicate that these are test transmissions. Normally the test call would require no further communications between the two stations involved.
-Transmitting a Test Acknowledgement call When the “TEST ACK” in DSC settings is set to ‘Auto TX’ (p. 66), the transceiver automatically transmits a reply call when receiving a Test call.
